Key Takeaways
- Base treatment on a representative gas envelope
- Protect the engine from moisture, particles and corrosive contaminants
- Plan alarms, media replacement and off-specification response
Technical guide introduction
Biogas commonly contains methane, carbon dioxide, moisture and trace contaminants such as hydrogen sulfide. CAMDA materials describe purification and preprocessing options that protect the generator and stabilize the delivered fuel.
Technical planning workflow
Six-Step Project Guide
Step 1
Base treatment on a representative gas envelope
Biogas commonly contains methane, carbon dioxide, moisture and trace contaminants such as hydrogen sulfide. CAMDA materials describe purification and preprocessing options that protect the generator and stabilize the delivered fuel.| Input to confirm | Guide context |
|---|---|
| Base treatment on a representative gas envelope | Product Guide |
| Protect the engine from moisture, particles and corrosive contaminants | Products |
| Plan alarms, media replacement and off-specification response | 12 minutes |
Step 2
Protect the engine from moisture, particles and corrosive contaminants
Treatment performance and gas recovery depend on the verified feed gas and selected process. Final values are project-specific. Base treatment on a representative gas envelope
Protect the engine from moisture, particles and corrosive contaminants
Plan alarms, media replacement and off-specification response
Gas composition, heating value, hydrogen sulfide, moisture, particles, siloxanes and other relevant contaminants
Minimum, normal and maximum flow, pressure, temperature and composition variability
Required engine-inlet limits, gas destination, operating hours and redundancy objective
Step 3
Plan alarms, media replacement and off-specification response
A brochure-backed overview of desulfurization, dehydration, filtration, pressure stabilization, monitoring and gas-quality control.Base treatment on a representative gas envelope
Treatment performance and gas recovery depend on the verified feed gas and selected process. Final values are project-specific.
Protect the engine from moisture, particles and corrosive contaminants
A brochure-backed overview of desulfurization, dehydration, filtration, pressure stabilization, monitoring and gas-quality control.
Plan alarms, media replacement and off-specification response
The gas composition, pressure, contaminants and variability data needed to select a generator and define preprocessing safely.
Step 4
Gas composition, heating value, hydrogen sulfide, moisture, particles, siloxanes and other relevant contaminants
The gas composition, pressure, contaminants and variability data needed to select a generator and define preprocessing safely.| Review resource | Format | Knowledge area | Reading time |
|---|---|---|---|
| Gas Quality and Generator Project Review | Product Guide | Products | 11 min |
| Waste-Gas Power Project Inputs | Product Guide | Products | 11 min |
| Installation Inspection and Handover Record | Service Guide | Service Support | 11 min |
Step 5
Minimum, normal and maximum flow, pressure, temperature and composition variability
The fuel, site, operating and heat-use information needed to frame biogas, landfill-gas, coal-mine-gas and other recovered-fuel projects.Step 6
Required engine-inlet limits, gas destination, operating hours and redundancy objective
A structured review of civil, mechanical, cooling, fuel, exhaust, electrical and control interfaces before commissioning. Product Guide Products
- Auxiliary Systems & Environmental Engineering Guide CAMDA-AUXILIARY-ENGINEERING-GUIDE
- Environmental Systems Technical Reference CAMDA-ENVIRONMENTAL-SYSTEMS-REFERENCE
- Gas Quality and Generator Project Review Product Guide
Explore connected content
Products and Solutions in This Guide
Related products 7
- FGT200 Fuel Gas Treatment Skid A project-engineered fuel-gas treatment skid that conditions inlet gas before a generator, with the process selected from gas analysis and operating requirements.
- CBG500 Biogas Generator Set Biogas generator system configured for renewable and waste-to-energy projects.
- CLG800 Landfill Gas Generator Set Landfill-gas generator system for site power and energy-recovery projects.
- CMG600 Coal Mine Gas Generator Set Coal-mine-gas generator platform for recovered-fuel power projects.
View 3 more related products
- CSG1000 Syngas Generator Set Project-configured syngas generator system for alternative-fuel applications.
- Biogas Purification System A project-engineered process for desulfurization, compression and carbon-dioxide removal based on raw-gas composition and the required product-gas quality.
- Gas Preprocessing System A generator fuel-conditioning system combining filtration, dehydration, pressure stabilization, temperature control and online monitoring.
Related solutions 2
Related industries 2
Continue your review
Related Technical Material
- Auxiliary Systems & Environmental Engineering Guide CAMDA-AUXILIARY-ENGINEERING-GUIDE
- Environmental Systems Technical Reference CAMDA-ENVIRONMENTAL-SYSTEMS-REFERENCE
- Gas Quality and Generator Project Review Product Guide
- Waste-Gas Power Project Inputs Product Guide
- Installation Inspection and Handover Record Service Guide
About the Author CAMDA Technical Team
Technical Review CAMDA Technical Team
