Application engineering
01 Projects begin with load, fuel, site and integration requirements.
About CAMDA
Engineering Reliable Power. Manufacturing with Discipline.
CAMDA was founded in 1998 and integrates R&D, design, production, sales and system engineering.
Manufacturing integration
02 Generator packages, controls and auxiliaries are assembled and verified.
Global project support
03 Delivery coordination, commissioning and lifecycle service support international projects.
Manufacturing Center
04 Generator-set assembly, integration and project preparation capability.
Manufacturing and engineering
About CAMDA
CAMDA was founded in 1998 and integrates R&D, design, production, sales and system engineering.
CAMDA was founded in 1998 and integrates R&D, design, production, sales and system engineering.
Application engineering
Projects begin with load, fuel, site and integration requirements.
Manufacturing integration
Generator packages, controls and auxiliaries are assembled and verified.
Global project support
Delivery coordination, commissioning and lifecycle service support international projects.
Availability
Redundancy and maintenance strategy follow the required operating availability.
Built Through Experience. Evolving with Industry.
CAMDA founded
The company began developing and delivering generator-set solutions.
Manufacturing expanded
Manufacturing and project-integration capabilities expanded for broader applications.
Gas power specialization
Gas generation and distributed-energy solution capabilities were strengthened.
Global project delivery
International project and service coverage continued to grow.
Integrated energy systems
Engineering scope expanded across controls, heat recovery and balance-of-plant systems.
Lifecycle service development
Digital support, structured service delivery and content governance were advanced.
One Team. From Application Review to Lifecycle Support.
Plan
Define requirements and service boundaries.
Deliver
Coordinate installation and technical records.
Commission
Check, start and hand over the system.
Maintain
Plan service, parts and technical support.
Commissioning
Controlled pre-start, first-start, no-load, load, transfer, synchronization, protection and operator-handover activities for the approved system.
Application Engineering
Selection and system-definition support based on duty, fuel, site conditions and integration boundaries.
Manufacturing and testing capability
Manufacturing Capability Built for Integrated Power Systems
Generator-set assembly, integration and project preparation capability.
Application assessment
Duty, environment and integration boundaries are defined first.
System engineering
Generation, controls and auxiliaries are coordinated as one system.
Delivery coordination
Manufacture, testing and site interfaces follow the agreed project scope.
Lifecycle support
Commissioning, maintenance and parts support continue after handover.
20 kW-50 MW+
Power range
Diesel · Natural Gas · Biogas
Fuel options
Manufacturing Center
From Components to a Verified Power System
Generator-set assembly, integration and project preparation capability.
Standby · Prime · Continuous
Operating modes
50 Hz · 60 Hz
Frequency
Since 1998
Power-system engineering and manufacturing experience
600 MW+
Published gas power installed capacity
145+
Published patent portfolio
Lifecycle
Engineering, testing, commissioning and service support
Generator Test Center
Testing Capability Before Delivery
Factory verification and functional test capability for delivered generator systems.
Availability
Redundancy and maintenance strategy follow the required operating availability.
Integration
Electrical, control, fuel and mechanical interfaces are coordinated.
Operating environment
Site conditions, logistics and service access inform the final package.
Data Centers
Critical standby and prime-power systems designed around availability, redundancy and integration requirements.
Manufacturing
Reliable power systems for process continuity, peak support and resilient industrial operations.
Mining & Remote Sites
Rugged project configurations for remote sites, variable loads and constrained logistics.
Oil & Gas
Engineered power packages for upstream, midstream and distributed field operations.
Utilities & Independent Power
Multi-unit power plants, grid-parallel controls and lifecycle service for utility-scale duties.
AUTH-001; final-approved company design
Quality Control at Every Critical Stage
ISO 9001 Quality Management System
Brochure-listed certification category. Certification body, number, legal entity, scope and dates are pending confirmation from a legible original certificate.
ISO 14001 Environmental Management System
Brochure-listed certification category. Certification body, number, legal entity, scope and dates are pending confirmation from a legible original certificate.
ISO 45001 Occupational Health and Safety
Brochure-listed certification category. Certification body, number, legal entity, scope and dates are pending confirmation from a legible original certificate.
SGS CE — Gas Generator Sets
Brochure-listed SGS CE category for gas generator sets. Legal entity, standards, covered models, certificate number and dates are pending confirmation from a legible original.
verified
Traceable Records. Clear Project Handover.
2026 English company brochure p3-p5
CAMDA 2026 Company & Product Brochure Current 2026.1 CAMDA Gas Generator Brochure 2025 Current 2025.1 CAMDA Diesel Power Solution Current 2025.1 Auxiliary Systems & Environmental Engineering Guide Current 2026.1 Service, Warranty & Spare Parts Guide Current 2026.1
Explore records Company and Manufacturing Capability
Coordinated Delivery for Projects Worldwide
Selected landfill gas, biogas, coalbed methane, natural-gas and offshore projects.
Global applications
Published projects cover industrial, utility, waste-gas and field applications.
Integrated scope
Equipment, controls and commissioning are coordinated against project requirements.
Lifecycle support
Service planning continues beyond equipment delivery.
CNPC Tanzania Gas Power Project
A 12 MW natural-gas project with four Jenbacher J616 generator sets.
Chengdu Chang’an Landfill Gas Power Project
A 30 MW landfill-gas project equipped with twenty Jenbacher J420 generator sets.
2026 English company brochure p23
Project Delivery from Factory Release to Site Handover
Chongqing Luoqi Biogas Power Project
An 18 MW kitchen-waste biogas project equipped with twelve Jenbacher J420 generator sets.
Ankleshwar Industrial Power Project
Integrated generation package supporting a demanding industrial operating profile.
Sarulla Geothermal Support Project
Engineered power equipment and support scope for a complex energy project.
Chattogram Critical Power Project
Critical standby power system delivered for resilient facility operations.
Nigeria 12 MW Independent Power Project
A 12 MW project combining generator packages, controls and site commissioning.
Shandong Yingxuan 18 MW Biogas Project
An 18 MW industrial wastewater biogas project equipped with six Jenbacher J620 generator sets.
Service and Support Across the Project Lifecycle
People Behind Every Power System
Pre-sales selection, commissioning, training, remote diagnosis, spare parts and maintenance support.
Commissioning
Controlled pre-start, first-start, no-load, load, transfer, synchronization, protection and operator-handover activities for the approved system.
Application Engineering
Selection and system-definition support based on duty, fuel, site conditions and integration boundaries.
Installation Guidance
Structured review of civil, mechanical, cooling, fuel, exhaust, electrical and control interfaces before commissioning release.
Preventive Maintenance
Duty- and condition-based maintenance planning using approved manuals, operating history, environmental exposure and trend evidence.
Parts Support
Serial-number-based identification and supply support for consumables, service kits, repair parts and project-specific electrical or control components.
Warranty Support
Contract-based warranty case intake, evidence review, technical classification and coordinated disposition for delivered equipment.
Corporate Information & Verification
- Registered company name
- CAMDA New Energy Equipment Co., Ltd.
- Headquarters
- Tangchun Youth Road, Liaobu Town, Dongguan City, Guangdong Province, China
- Manufacturing base
- Manufacturing Center
- Business contact
- sf@camda.cc
CAMDA Headquarters
Visit, Verify and Discuss Your Project
Tangchun Youth Road, Liaobu Town, Dongguan City, Guangdong Province, China
- Manufacturing Center
- Generator Test Center
Build Your Next Power Project with an Integrated Team
CAMDA was founded in 1998 and integrates R&D, design, production, sales and system engineering.