Operating duty
Standby, prime or continuous requirements.
Project requirements
Oil & Gas
Engineered power packages for upstream, midstream and distributed field operations.
Site conditions
Environment, logistics and installation constraints.
Fuel and utilities
Available fuel quality and supporting systems.
Lifecycle
Commissioning, service and parts planning.
Power Risks Oil & Gas Operations Cannot Afford
Operating duty
Standby, prime or continuous requirements.
Site conditions
Environment, logistics and installation constraints.
Fuel and utilities
Available fuel quality and supporting systems.
Lifecycle
Commissioning, service and parts planning.
Operating Load Characteristics for Oil & Gas
Operating duty
Standby, prime or continuous requirements.
Site conditions
Environment, logistics and installation constraints.
Fuel and utilities
Available fuel quality and supporting systems.
Lifecycle
Commissioning, service and parts planning.
Recommended Power Architectures
Single package
One coordinated generation package.
Power range: 2000 kW Frequency: 50 Hz Rated mode: Prime / continuous Explore Configuration
Multi-unit plant
Parallel units for capacity and operating flexibility.
Power range: Project configured Frequency: 50 Hz Rated mode: On request Explore Configuration
Integrated system
Generation, controls and auxiliaries as one project scope.
Published display: 5-inch 800 x 480 color display Published networks: Dual CAN, RS232, RS485 and Ethernet Published protocols: Modbus RTU/TCP Explore ConfigurationMatch the System to Oil & Gas
| Design Priority | Recommended Architecture | Core Equipment | Control Strategy | Explore |
|---|---|---|---|---|
| Operating duty | Single package | CG2000 Gas Generator | Project specific | View Solution |
| Site conditions | Multi-unit plant | FGT200 Fuel Gas Treatment Skid | Verified before configuration | View Solution |
| Fuel and utilities | Integrated system | ComAp IG500-G2 Generator Controller | Included in selection | View Solution |
| Lifecycle | Single package | Gas Preprocessing System | Available by project scope | View Solution |
Core Systems for Oil & Gas
Published gas and diesel generator systems from CAMDA authorized brochures. CG2000 Gas Generator
Gas generator platform for distributed energy and industrial power.
Power range: 2000 kW Frequency: 50 Hz View System FGT200 Fuel Gas Treatment Skid
A project-engineered fuel-gas treatment skid that conditions inlet gas before a generator, with the process selected from gas analysis and operating requirements.
Power range: Project configured Frequency: 50 Hz View System ComAp IG500-G2 Generator Controller
A brochure-listed ComAp IG500-G2 controller for standby, grid-parallel, island and multi-unit synchronization and load-sharing applications.
Published display: 5-inch 800 x 480 color display Published networks: Dual CAN, RS232, RS485 and Ethernet View System
Gas Preprocessing System
A generator fuel-conditioning system combining filtration, dehydration, pressure stabilization, temperature control and online monitoring.
Functions: Filtration, dehydration and purification Conditioning: Pressure and temperature regulation View SystemEngineering Beyond the Generator
Operating duty
Standby, prime or continuous requirements.
Site conditions
Environment, logistics and installation constraints.
Fuel and utilities
Available fuel quality and supporting systems.
Lifecycle
Commissioning, service and parts planning.
Gas Power Generation Solutions
Integrated gas generator systems for natural gas, biogas, landfill gas and coalbed methane applications.
Environmental Protection Engineering
Integrated exhaust, acoustic, vibration, fuel-interface, gas-treatment and SCR engineering for generator and power-plant projects.
From Site Data to Commissioned Resilience
- 01
Assess
Confirm loads, duty, environment and fuel.
- 02
Engineer
Select equipment and define system interfaces.
- 03
Deliver
Manufacture, test and coordinate installation.
- 04
Support
Commission, train and support operations.
Performance Targets We Engineer For
Directus projects record
Oil & Gas Projects
CNPC Pakistan 667 and UEP Power Projects
A combined 28 MW overseas project using ten Wärtsilä gas generator sets and two Perkins diesel generator sets.
View Project
Lufeng LF13-2 Offshore Gas Power Project
An offshore associated-petroleum-gas power project using Wärtsilä VHP5794 generator sets.
View Project
CNPC Tanzania Gas Power Project
A 12 MW natural-gas project with four Jenbacher J616 generator sets.
View ProjectWhy Oil & Gas Teams Work With CAMDA
Operating duty
Standby, prime or continuous requirements.
Site conditions
Environment, logistics and installation constraints.
Fuel and utilities
Available fuel quality and supporting systems.
Lifecycle
Commissioning, service and parts planning.
Gas Power Generation Solutions
Integrated gas generator systems for natural gas, biogas, landfill gas and coalbed methane applications.
Environmental Protection Engineering
Integrated exhaust, acoustic, vibration, fuel-interface, gas-treatment and SCR engineering for generator and power-plant projects.
Oil & Gas Technical Resources
Gas Quality and Generator Project Review
The gas composition, pressure, contaminants and variability data needed to select a generator and define preprocessing safely.
Product GuidePlanning a Gas Power Generation Project
A practical sequence for defining fuel, electrical duty, site, balance-of-plant, heat use and lifecycle responsibilities before a gas-power proposal.
Planning GuideSpare Parts Identification and Request Guide
A serial-number-based checklist for consumables, service kits, repair parts and project-specific electrical or control components.
Service GuideBiogas Purification and Fuel Preprocessing
A brochure-backed overview of desulfurization, dehydration, filtration, pressure stabilization, monitoring and gas-quality control.
Product GuidePlan Your Oil & Gas Power Architecture
Choose from 10 inquiry types and share the available project details.Keep Every Rack Online. Engineer the Power Behind It.
Engineered power packages for upstream, midstream and distributed field operations.