Power Generation Products

Published gas and diesel generator systems from CAMDA authorized brochures.

Get Selection Support

Find the Right Power System

Browse published gas and diesel generator systems, controls and integrated auxiliaries.

7 Products
Compare Download Catalog
Active: controls auxiliaries Clear all
Synchronization control and auxiliary system

Controls & Auxiliaries

Synchronization Control System

50 Hz
Grid parallel
Project configured

Control system for generator synchronization, protection and project integration.

SGC MkII 420 generator controller shown in the CAMDA brochure

Controls & Auxiliaries

SGC MkII 420 Generator Controller

AUTO, MANUAL and TEST
Voltage, frequency, current and power factor
Up to 100 events in the brochure description

A brochure-listed SGC MkII 420 controller for generator and breaker control, monitoring, operating modes, event records and project-configured logic.

ComAp IG500-G2 controller shown in the CAMDA brochure

Controls & Auxiliaries

ComAp IG500-G2 Generator Controller

5-inch 800 x 480 color display
Dual CAN, RS232, RS485 and Ethernet
Modbus RTU/TCP

A brochure-listed ComAp IG500-G2 controller for standby, grid-parallel, island and multi-unit synchronization and load-sharing applications.

DSE7320 generator controller shown in the CAMDA brochure

Controls & Auxiliaries

DSE7320 Generator Controller

Automatic mains-failure control
Generator and mains monitoring
Project-defined breaker, ATS and remote points

A brochure-listed DSE7320 controller platform for automatic mains-failure and generator-control applications with project-defined interfaces and settings.

Automatic transfer switch cabinet shown in the CAMDA brochure

Controls & Auxiliaries

Automatic Transfer Switch Cabinet

I - O - II
Automatic and emergency manual
Visible open isolation and integrated interlock

A brochure-backed ATS cabinet for automatic two-source transfer with visible isolation positions, interlocking and controlled emergency manual operation.

Automatic grid-parallel cabinet shown in the CAMDA brochure

Controls & Auxiliaries

Automatic Grid-Parallel Cabinet

Synchronization, grid connection and unloading
Settable output and load shedding
Manual and automatic

A brochure-backed grid-parallel cabinet for synchronization, settable power, unloading, load shedding and project-approved grid protection.

Generator-set paralleling cabinet shown in the CAMDA brochure

Controls & Auxiliaries

Generator Set Parallel Cabinet

Multi-generator common-bus control
Synchronization and active/reactive load sharing
Staged capacity and maintenance flexibility

A brochure-backed multi-generator paralleling cabinet for synchronization, load sharing, staged capacity, resilience and future system expansion.

Not Sure Which Generator Fits Your Project?

Share fuel, required capacity, operating mode and site conditions for practical selection support.

  1. Define FuelConfirm the available energy source.
  2. Confirm LoadShare capacity and duty profile.
  3. Review SiteDescribe location and conditions.
  4. Receive DirectionContinue to the secure inquiry.
Start Product Selection Talk to an Engineer

Compare Selected Products

Select two or three products for a side-by-side review.

No products selected yet
Compare (0)

Compare Power Systems Side by Side

Review published specifications and capabilities for the selected products.

Showing 3 published products
Parameter Synchronization Control System Controls & Auxiliaries SGC MkII 420 Generator Controller Controls & Auxiliaries ComAp IG500-G2 Generator Controller Controls & Auxiliaries
Power range Project configured
Rated mode Grid parallel
Frequency 50 Hz
Published modes AUTO, MANUAL and TEST
Published monitoring Voltage, frequency, current and power factor
Event record Up to 100 events in the brochure description
Actions

Get a Product Recommendation

Tell us the operating context and continue to the secure project inquiry.

CAMDA Engineering

Selection Support from CAMDA Engineers

Technical review connects the published product range with the requirements supplied in your secure inquiry.

  • Requirement ReviewLoad, fuel, location and operating mode.
  • Product MatchingPublished equipment and configuration scope.
  • Technical ConfirmationInterfaces, site conditions and final output.
  • Proposal & Next StepsCommercial and delivery review after confirmation.

Need a Configuration Built Around Your Project?

Share operating conditions for a reviewed power-system selection.

Talk to an Engineer Request a Quote +86-769-88989999